Yanmar 1GM10 Dokumentacja Pobierz pdf (Strona 78)

LONG-TERM STORAGE

72 GM Series Operation Manual

DRAIN SEAWATER

COOLING SYSTEM

In cold temperatures or before long-term

storage, be sure to drain the seawater

from the cooling system.

1. Put a pan under the seawater drain

cocks.

2. Loosen the drain cock at the side of the

thermostat cover and drain the water

from the inside.

3. Loosen the three bolts holding the side

cover (Figure 1, (7)) of the seawater

pump. Remove the cover and drain the

seawater from the pump body

(Figure 1, (4)). Reinstall the cover and

retighten the bolts when finished.

Figure 1

1–Cam

2 – Inlet

3–Outlet

4 – Seawater Pump Body

5 – Impeller

6 – Gasket

7–Side Cover

4. Close the drain cock.

RETURNING THE ENGINE

TO SERVICE

1. Replace the oil and the oil filter before

running the engine.

2. Supply fuel if the fuel in the fuel tank

was removed, and prime the fuel

system.

3. Operate the engine at idle speed for 1

minute.

4. Check fluid levels and check engine for

leaks.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

0005887

GM_OM.book 72 ページ２０１３年６月１０日　月曜日　午後２時２６分

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 93 94

Komentarze do niniejszej Instrukcji

Brak uwag

Yanmar 1GM10 Dokumentacja Strona 78

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Silnik Yanmar 1GM10