Yanmar BY series Dokumentacja Pobierz pdf (Strona 37)

Checking the Engine Oil

(5)

(1)

(4)

(2)

(3)

0004902

Figure 6

1. It is recommended that the engine be

as level as possible before checking the

oil.

2. Remove dipstick (Figure 6, (1)) and

wipe with clean cloth.

3. Fully reinsert dipstick.

4. Remove dipstick. The oil level should

be between upper (Figure 6, (2)) and

lower (Figure 6, (3)) lines on the

dipstick.

5. Add oil if necessary. See Adding

Engine Oil on page 31. NOTICE:

NEVER overfill the engine with oil.

6. Fully reinsert dipstick.

Adding Engine Oil

1. NOTICE: Prevent dirt and debris

from contaminating engine oil.

Carefully clean the dipstick and the

surrounding area before you

remove the cap. Remove the oil filler

port cap (Figure 6, (4)) from filler port

(Figure 6, (5)) and fill with engine oil.

2. Fill with oil to the upper limit on the

dipstick (Figure 6, (2)). NOTICE:

NEVER overfill the engine with

engine oil.

3. Insert the dipstick fully to check the

level. NOTICE: ALWAYS keep the oil

level between upper and lower lines

on the oil cap / dipstick.

4. Tighten the filler port cap securely by

hand.

BEFORE YOU OPERATE

6LPA Series Operation Manual 31

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 103 104

Brak uwag

Yanmar BY series Dokumentacja Strona 37