Yanmar 3HM Instrukcja Użytkownika Pobierz pdf (Strona 29)

2-b)

Raise the decompression handle to the "NO

COMPRESSION" position.

2-c)

Attach the starter handle with priming shaft as

the angle shown in the figure and turn the

starting handle hard, 5-6 times, and if the

flywheel gains momentum...

2-d)

Pull the decompression lever down to the

compression position. Turn two or three times

without stopping, and the engine will start.

2-e)

After starting return control lever from "FULL SPEED" to "SLOW SPEED"

[7-2.] Cautions after starting the engine.

1) Warm up the engine for more than 5 minutes. Because lube oil does not reach all the

moving parts as soon as the engine is started.

Operate the engine at around 850-900 rpm for at least five minutes.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 55 56

Brak uwag

Yanmar 3HM Instrukcja Użytkownika Strona 29