Yanmar 4JH3-TCE Dokumentacja Pobierz pdf (Strona 27)

6. Periodic Inspections and Maintenance

27

EN

6.2.2.5 Filling oil (total quantity 2.2

liter)

6.2.2.6 By using MerCruiser pump

or simple market pump

First follow steps (1), (2), (4) on page 26.

(1) Use a MerCruiser pump with Part

number 91-85729A1 like the one

shown on p. 24, 6.2.1.4, or use a

similar pump available on the mar-

ket.

(2) Screw the pump on a new bottle of

Quicksilver High Performance Gear

Lube Part number 92-850743A1

(0.946 liter) from MerCruiser.

(3) Remove the oil changing plug be-

low the shift lever.

(4) Connect the hose with a hose clip

to the adapter joint at the drain po-

sition.

(5) Take out the plug from the upper

case cover.

(6) Fill the oil by pushing the upper

part of the pump. After the first bot-

tle is empty, screw in the oil chang-

ing plug (don't forget the gasket).

(7) Change the bottle while the pump

and hose remain connected with

the adapter joint.

(8) After filling, first screw in and tight-

en the plug at the top cover. Then

remove the oil bottle, pump, hose

and adapter joint and screw in the

oil drain plug (don't forget the gas-

ket).

APlug

BO-ring

C Adapter joint

003870-00E

A

B

C

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33

Komentarze do niniejszej Instrukcji

Brak uwag