Yanmar 1GM10V Dokumentacja Pobierz pdf (Strona 22)

3. Operation

22

3.3.2 How to Start the Engine

(1) Start the engine according to the

following procedures:

Electric Operation

1. Open the Kingston cock.

2. Open the fuel tank cock.

3. Set the remote control lever in NEU-

TRAL.

Safety equipment (optional) makes it

impossible to start the engine in any other

position than NEUTRAL.

4. Turn on the battery switch.

5. Insert the key into the key switch and

turn the key to ON. If the alarm buzzer

sounds and alarm lamps come on, the

alarm devices are normal.

Note: The cooling water temp. warning

lamp does not come on.

(See 2.5.1.(3))

6. Push the start button to start the

engine. Release the start button when

the engine has started. The alarm

buzzer should stop and the alarm

lamps go out.

002550-00E

002559-00E

OFF

ON

Ԙ

Ԙ OFF position

ԙ ON position

ԙ

002560-00E

Manual Operation

1. Open the Kingston cock.

2. Open the fuel tank cock.

3. Set the remote control lever in NEU-

TRAL.

4. Pull out the decompression lever.

5. Put the starter handle on the starter

shaft, align the groove and pin, and

turn by hand. When you begin turning,

you will hear the sound of fuel being

injected.

6. Turn the handle vigorously. When the

rotation is rapid, return the decompres-

sion lever to original position. The

engine starts.

7. Remove the starter handle from the

starter shaft.

Decomp. lever

Decompression

Drive

002549-00E

GM OPERATION.book 22 ページ２００４年１０月４日　月曜日　午前１１時１１分

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

Komentarze do niniejszej Instrukcji

Brak uwag