Yanmar 1GM10V Dokumentacja Pobierz pdf (Strona 31)

MARINE GEAR OR SAIL-

DRIVE OIL

Marine Gear Oil Specifications

Use marine gear oil that meets or exceeds

the following guidelines and classifications:

KM2P-1 (S), (G) or (GG):

• API Service Categories: CD or higher

• SAE Viscosity: #20 or #30

Sail-Drive Oil Specifications -

SD20

Refer to the Sail-Drive Operation Manual for

the procedure to fill or replace the drive oil.

SD20:

• API Service Category: GL4.5

• SAE Viscosity: 90 or 80W90

• QuickSilver

High Performance Gear

Lube

Checking Marine Gear Oil

1. Turn the engine off. Make sure the engine

is as level as possible and wipe area clean

around the marine gear filler port

(Figure 6, (4)).

(1)

(3)

(4)

(2)

0005851

Figure 6

1 – Dipstick

2 – Upper Limit

3 – Lower Limit

4 – Marine Gear Filler Port

Marine Gear Oil Capacity

KM2P 0.3 L (0.63 pt)

2. Remove the filler cap at the top of the

housing.

3. Remove the dipstick (Figure 6, (1)) and

wipe with a clean cloth.

4. Fully reinsert the dipstick.

5. Remove the dipstick. The oil level should

be between the upper (Figure 6, (2)) and

lower (Figure 6, (3)) lines on the dipstick.

6. Fully reinsert the dipstick.

QuickSilver is a registered trademark of Brunswick Corporation.

BEFORE YOU OPERATE

GM Series Operation Manual 25

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 91 92

Komentarze do niniejszej Instrukcji

Brak uwag

Yanmar 1GM10V Dokumentacja Strona 31

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Silnik Yanmar 1GM10V