Yanmar 1GM10V Dokumentacja Pobierz pdf (Strona 66)

Are there abnormal vibrations or noise?

Depending on the hull structure, engine and

hull resonance may suddenly increase at

certain engine speed ranges, causing heavy

vibrations. Avoid operation in this speed

range. If any abnormal sounds are heard,

stop the engine and inspect for the cause.

Alarm sounds during operation.

If the alarm sounds during operation, lower

the engine speed immediately, check the

warning lamps and stop the engine for

repairs.

Is there water, oil or fuel leakage? Are

there any loose bolts or connections?

Check the engine room daily for any leaks

or loose connections.

Is there sufficient fuel in the fuel tank?

Refill the fuel tank in advance to avoid

running out of fuel. If the tank runs out of fuel,

bleed the fuel system.See Air Bleeding from

the Fuel System After Starting Failure on

page 34.

TROUBLESHOOTING

INFORMATION

If the engine does not operate properly, refer

to the Troubleshooting Chart on page 61

or see your authorized Yanmar Marine

dealer or distributor.

Supply the authorized Yanmar Marine

dealer or distributor with the following

information:

• Model name and serial number of your

engine

• Boat model, hull material, size (tons)

• Use, type of boating, number of hours run

• Total number of operation hours (refer to

hour meter), age of boat

• The operating conditions when the

problem occurs:

• Engine rpm

• Color of exhaust smoke

• Type of diesel fuel

• Type of engine oil

• Any abnormal noises or vibration

• Operating environment such as high

altitude or extreme ambient

temperatures

• Engine maintenance history and

previous problems

• Other factors that contribute to the

problem

TROUBLESHOOTING

60 GM Series Operation Manual

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 91 92

Komentarze do niniejszej Instrukcji

Brak uwag

Yanmar 1GM10V Dokumentacja Strona 66

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Silnik Yanmar 1GM10V