Yanmar 6LPA-STZP2 Dokumentacja Pobierz pdf (Strona 42)

BEFORE YOU OPERATE

36 6LPA Series Operation Manual

CRANKING THE ENGINE

NOTICE

When the engine has not been used for a

long period of time, engine oil will not be

distributed to all of the operating parts.

Using the engine in this condition will lead

to seizure. After a long period of no use,

distribute engine oil to each part by

cranking. Perform in accordance with the

following procedures before beginning

operation.

1. Open the seacock.

2. Open the fuel cock.

3. Put the remote control shift lever in the

NEUTRAL See Starting the Engine on

page 39.

4. Turn on the battery switch (if equipped).

Figure 9

Figure 10

5. Turn key to ON (Figure 10, (3)). It is

normal for the alarm to sound and the

warning indicators to light during

cranking.

Note: If the engine has not been

operated for a long period of

time, check that the key can be

moved from START to ON

positions smoothly.

6. While pushing the STOP button

(Figure 10, (1)), turn the key to the

START position (Figure 10, (2)).

NOTICE

NEVER hold the key in the START

position for longer than 15 seconds or

the starter motor will overheat.

7. When the key is in the START position,

the engine will begin cranking.

Continue cranking for about 5 seconds

and listen for abnormal noise during

that time.

Note: If the STOP button is released

during the cranking procedure,

the engine will start. Do not start

the engine in this mode.

8. Move key to OFF position

(Figure 10, (4)). The engine will stop

cranking.

WARNING

Never touch or allow your

clothes to touch the

moving parts of the

engine during operation. If

a part of your body or

clothing is caught in the front drive

shaft, V-belt, propeller shaft, etc.

serious injury may result.

Check to see that no tools, pieces of

cloth, etc. are left on or around the

engine.

(1)

(2)

(3)

(4)

(5)

0004890

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 105 106

Komentarze do niniejszej Instrukcji

Brak uwag