Yanmar 6LPA-STP2 Dokumentacja Pobierz pdf (Strona 27)

100

101

Fill with the specified amount of engine oil.

①Remove the oil filler cap on the top of the

valve rocker cover and fill with oil.

②Remove the oil dipstick and check the level

of the oil with the gauge on the dipstick.

Oil should be filled to the maximum limit on

the dipstick gauge.

Engine oil capacity :

6LPA-DTP/-DTZP : 10.0

6LPA-STP/-STZP : 10.5

③Replace the dipstick and tighten the filler

cap firmly by hand.

3.3 Supplying Engine Lube Oil

Do not overfill.

Overfilling will cause oil to be sprayed

out from the breather during operation

and into the turbocharger, and lead to

engine problems.

[

NOTICE

]

Do not overfill.

Overfilling will cause oil to be sprayed

out during operation and effect the

efficiency of the marine drive.

[

NOTICE

]

Dipstick

Filer cap

Oil inlet

Max. Limit

Min. Limit

Supply lube oil in accordance with the marine

drive instructions.

●For MERCRUISER's stern-driven device (BRAVO) there is a power steering oil service tank on

the engine side. Fill with the specified amount of lube oil.

After taking piping for power steering system.

①Remove the cap from the power steering

oil service tank (on the side of the fresh

water tank) by turning it counter-clockwise,

and insert lube oil.

②Fill with oil to the maximum limit marked on

the dipstick attached to the inside of the cap.

To measure the oil level, wipe the dipstick

with a cloth, and then measure the oil level

by inserting the dipstick and tightening the

cap. Resupply with the necessary amount of

oil under initial operation.

③Replace the cap and tighten it.

Max. Limit

Min. Limit

Oil tank

6LPA-DTZP 6LPA-STZP

3.4 Supplying Marine Drive Oil

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 698 699

Komentarze do niniejszej Instrukcji

Brak uwag

Yanmar 6LPA-STP2 Dokumentacja Strona 27

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Silnik Yanmar 6LPA-STP2